User's Manual




RevisionHistory
Rev. 1.2 ,Feb.2015 20/44
HardwareUser
Guide ,DocumentNumber:N/A
Figure17.ComneonsuspendandsixCOMportsarenowappearingatthedevicemanager.
 Congratulations,yourdriverinstallationhasfinishedsuccessfully.
2.1.4 FlashUSBdriverandFTDIDriver
ThesedriversaremandatorytoflashnewARMsoftwareandLTEfirmwareimagesatthemodem
board.Taketherecommendeddrivers,seeSubsec.2.1.1,(flashtoolsubfolder)andfollowthe
instructionsfromtheinstallationwizards.
Note: Ifthisdriversarenotinstalledcorrectlyinstabilitiesattheflashprocessareoccurring
withoutsubstantialerrorinformationfromWinXPorWin7.
2.1.5 ProlificSerialtoUSBDriver
TheProlificdriverismandatorytoaccessallmodemboardUART(USIF)ports.Taketherecommended
driver,seeSubsec.2.1.1,(folderProlificDriver)andfollowtheinstructionsfromthe installation
wizard.
ConnecttheUSBcabletothedesiredUSIFportandcheckthattheCOMportappearscorrectlyinthe 
Win
devicemanager.(Win:Settings:ControlPanel:SystemProperties:Hardware:DeviceManager.Thisis
quitesimilartofindatWinXPandWin7.)