Owner's Manual

Page 15 of 18 2477S - Rev: 1/21/2014 7:27 AM
Mounting
Standard, single gang wall box
Wires
Line, Load, Ground – 12 AWG
Neutral – 18 AWG
Wires
Black – Line (Hot)
White – Neutral
Red – Load
Bare Copper - Ground
Color
White (color change kits available)
Set button
Clear
Air Gap
Set button (when pulled out)
Plastic
UV Stabilized Polycarbonate
Beeper
Yes
Setup LED
1 Dual-Color (green and red)
Status LEDs
2 white, can be dimmed or disabled (color change kits available)
Dimensions
4.1" H x 1.78" W x 1.47" D
Weight
120 grams / 0.26 pounds
Operating Environment
Indoors
Operating Temperature Range
32°F - 104° F (0° - 40°C)
Operating Humidity Range
0-90% relative humidity, non-condensing
Storage conditions
4F to +158F (-20 – 70 degrees Celsius)
Electrical
Voltage
100-277VAC +/- 10%
Frequency
50/60Hz Auto Detected at power-up
Maximum Load
17 Amp resistive capacity (100-277VAC)
1,800 Watt incandescent capacity (100-277VAC)
1 HP motors (at 120VAC only)
10 Amps Ballast (100-277VAC)
Surge Resistance
Up to 500 VAC
Retains all settings without power
Yes, all saved in Non-volatile EEPROM
Standby power consumption
< 1 watt
Safety Approved
ETL (Intertek Testing Services)
Certifications
FCC, IC Canada