User manual

5
NS-46E481A13
www.insigniaproducts.com
General
Specifications
Specifications are subject to change without notice.
Dimensions and weight
Screen
Display resolutions/VGA scan rates
Tuner
Inputs
Problem Solution
No power
• Make sure that the power cord is correctly connected to
your TV and a power outlet.
• Unplug the power cord, wait 60 seconds, then plug the
cord back in and turn on your TV.
• Other devices (for example, a surround sound receiver,
external speakers, fans, or hair dryers) may be
interfering with your TV. Try turning off one device at a
time to determine which device is causing interference.
After you have determined which device is causing
interference, move it further from the TV to eliminate
the interference.
“No signal” error
message is displayed
•Press INPUT and make sure that you have selected the
correct input for the device or service you are trying to
use.
• If you are using a cable or satellite box, use the remote
that came with that box to change channels.
• Make sure that you have the correct input selected to
view channels from the cable or satellite box.
After Auto Channel
Search, there are no
channels
• Reception can vary by channel depending on the
broadcast power level of a given station. Contact your
cable or satellite TV provider.
• Make sure that the antenna or cable/satellite TV is
connected securely to your TV.
• Try replacing the cable between the antenna/cable or
cable/satellite box and your TV.
One or more channels
do not display
• Make sure that the channels are not blocked. See
“Setting parental control levels” in the online User
Guide.
• Make sure that the channels are not hidden. The
channel may have been deleted from the channel list.
You can tune to the channel by pressing the number
buttons or you can add the channel back to the channel
list. See “Hiding channels” in the online User Guide.
• If you are using a cable or satellite box, use the remote
that came with that box to change channels.
• Make sure that you have the correct input selected to
view channels from the cable or satellite box.
• If you are using an antenna, the digital channel signal
may be low. To check the digital channel signal
strength, see “Checking the digital signal strength” in
the online User Guide.
Password is lost
•Enter 9999 to access parental controls, then set a new
password. See “Setting or changing the password” in
the online User Guide.
Some settings cannot
be accessed
• If a setting is grayed, the setting is not available in the
current video input mode.
TV cabinet creaks
• When the TV is in use, the temperature rises naturally
and may cause the cabinet to expand or contract which
can cause a creaking noise. This is not a malfunction.
Control buttons do
not work
• Make sure that the Button Lock option is set to Off.
See “Locking control buttons” in the online User Guide.
• Unplug the power cord, wait a few seconds, then plug
the cord back in and turn on your TV.
TV keeps turning off
• Make sure that the sleep timer is not turned on. See
“Setting the sleep timer” in the online User Guide.
Notes
• If the problem is not solved by using these
troubleshooting instructions, turn off your TV,
then turn it on again.
• Additional troubleshooting information is in
your online User Guide. Go to
www.insigniaproducts.com
, click Support &
Service, enter your model number in the
Product Search field, then click Search.
Without stand
42.3 × 25.24 × 2.28 in. (107.48 × 64.1 × 5.8 cm)
45.2 lbs. (20.5 kg)
With stand
42.3 × 27.6 × 9.8 in. (107.48 × 70.2 × 25 cm)
49.6 lbs. (22.5 kg)
Screen size measured
diagonally
46 in.
Display type LED
Panel 60 Hz vs.120 Hz 120Hz
Display resolution 1080p
Panel resolution 1920 (H) × 1080 (V)
Aspect ratio 16:9
Contrast ratio (typical)–panel 3000:1
Dynamic contrast ratio–
list value
15,000:1
Brightness (center typical)
cd/m2
300 nits
Comb filter 3d y/c digital
Response time 8 ms
Horizontal viewing angle 160°
Vertical viewing angle 160°
HDMI 1.3 1080p, 1080i, 720p, 480p, 480i
Component video 1080i, 720p, 480p, 480i
PC/VGA 640 × 480/60Hz,
800 × 600/60Hz,
1024 × 768/60Hz,
1280 × 1024/60Hz,
1680 × 1050/60Hz,
1920 × 1080/60Hz
Analog NTSC
Digital ATSC, 8-VSB, Clear-QAM
HDMI/DVI
2 (back), 1 (side)
E-EDID compliant
HDCP compliant
Component video 1 (back)
Composite video 1 (side)
Shared audio (component
and composite)
No
S-Video No
PC/VGA 1 (side)
3.5mm PC audio input 1 (side)
USB
1 (back)
Supports JPEG and firmware upgrade