User's Manual

AP Deployment Guide - System Release 1.4 Base Station Configurations
On-Ramp Wireless Incorporated 44 010-0006-00 Rev. F
Base Station Option
Description
Applications
Required On-Ramp Wireless
Hardware
Additional Items Required
TRN-1031
Base Station
 Indoor rack-mounted
base station
 Contains a 19-inch
rack 3RU shelf
 AP is mounted on the
shelf
 Powered by either
120/240 VAC or 48
VDC
Indoor rack mount
environment with access to
power and corporate IP
network.
For example:
 Communication site
shelters
 IT equipment rooms
 Substation equipment
rooms
 Access Point
 A 19-inch rack 3RU shelf including:
 120/240 VAC power supply
 48 VDC terminal strip/cable
 Antenna surge suppressor
 GPS antenna
 9 dBi AP antenna
 Site-specific cables for
the AP antenna and the
GPS antenna
 Site-specific installation
hardware
TRN-1032
Base Station
 Rack-mounted base
station
 Contains a 19-inch
rack 3RU shelf
 Powered by either
120/240 VAC or 48
VDC
 AP is mounted
outdoors
Secure locations with indoor
rack mount environment,
power and access to corporate
IP network. For example:
 Rooftop outdoor AP
 Tower-mounted AP
 Wood pole-mounted AP
 Access Point
 A 19-inch rack 3RU shelf including:
 120/240 VAC power supply
 48 VDC terminal strip/cable
 Antenna surge suppressor
 GPS antenna
 9 dBi AP antenna
 Site-specific cables for
the AP antenna and the
GPS antenna
 Site-specific Ethernet
cable between the shelf
and the AP
 Site-specific installation
hardware
 AP pipe mount (optional)
NOTE: All TRN base stations require an external AP antenna.
For information about any of these packages, contact your On-Ramp Wireless representative at [e-mail].