User Manual
9
GB
Wash cycles and options
Table of programmes and wash cycles
Wash options
The “PRIME” technology optimises energy, water and time
consumption according to the quantity of garments actually
inserted in the machine. Moreover, pressing the button
allows for selecting the following options:
- Water: allows for reducing water consumption without having
to renounce impeccable results (recommended for heavily soiled
garments).
- Energy: automatically selected by “PRIME”, this option
reduces energy consumption (recommended for normally soiled
garments).
- Time: allows for reducing wash cycle duration (recommended
for lightly soiled garments).
! This may only be used in conjunction with wash cycles 1, 2,
,
, 5 (all three levels) and 6, 7, 8, 9 (- Energy and - Time levels).
Extra Rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! It cannot be used in conjunction with wash cycles 8,
.
Easy iron
By selecting this function, the wash and spin cycles will be
modified in order to reduce the formation of creases. At the end of
the cycle the washing machine will perform slow rotations of the
drum, while the EASY IRON and START/PAUSE indicator lights will
flash (blue and orange respectively). To end the cycle, press the
START/PAUSE button or the EASY IRON button. For wash cycles
number 11-13, the machine will end the cycle while the laundry
is soaking; the EASY IRON and START/PAUSE indicator lights
will flash. To drain the water so that the laundry may be removed,
press the START/PAUSE button or the EASY IRON button.
! It cannot be used in conjunction with wash cycles 8, 10, 14,
, .
Stain removal
This function is particularly
useful for the removal of
stubborn stains. Insert extra
compartment 4 (supplied with
the appliance) into compartment
1. When pouring in the bleach,
be careful not to exceed the
“max” level marked on the
central pivot (see figure). To
bleach laundry with no other
washing action, pour the bleach
into extra compartment 4, select
the “Rinse” cycle and activate the “Stain removal” option
. To bleach during a wash cycle, pour in the detergent and any
fabric softener you wish to use, select the desired wash cycle
and enable the “Stain removal” option. The use of extra
compartment 4 excludes the pre-wash.
! It cannot be used in conjunction with wash cycles 1, 6, 8, 10,
11, 12, 13, 14,
.
4
2
3
1
4
2
1
3
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
Wash cycles
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergents
Max. load (kg)
Residual
dampness %
Energy
consumption
kWh
Total water lt
Cycle duration
Prewash
Wash
Bleach
Fabric
softener
Daily Programs
1
Cottons with Pre-wash: extremely soiled whites. 90° 1600
-
8 44 2,72 95 190’
2
White Cottons: extremely soiled whites. 90° 1600 -
8 44 2,45 83 175’
Standard Cotton 60° (1): heavily soiled whites and resistant colours. 60° 1600 -
8 44 1,23 73 200’
Standard Cotton 40° (2): heavily soiled whites and delicate colours. 40° 1600 -
8 44 1,09 92 185’
5
Synthetics: heavily soiled resistant colours. 60° 800 -
4,5 46 1,03 60 115’
5
Synthetics (3): lightly soiled resistant colours. 40° 800 -
4,5 46 0,56 60 100’
6 Jeans
40° 800 -
-
4 - - - 80’
7 Shirts
40° 600 -
2 - - - 70’
8
Mix-Cool 30’: to refresh lightly soiled garments quickly (not suitable for wool, silk and
clothes which require washing by hand).
Cold
water
800 -
-
3 71 0,10 36 30’
9
Standard Cotton 20°: heavily soiled whites and delicate colours. 20° 1600 -
8 - - - 175’
Special
10
Wool: for wool, cashmere, etc. 40° 800 -
-
2 - - - 90’
11
Silk/Curtains: for garments in silk and viscose, lingerie. 30° 0 -
-
2 - - - 65’
12 Duvets
30° 1000 -
-
3,5 - 120’
13 Outwear
30° 400 -
- - 2,5 - - - 60’
14 Sport Shoes
30° 600 -
-
Max.2
pairs
- - - 60’
Partials
Rinse - 1600 - -
8 - - - 36’
Spin + Drain - 1600 - - - - 8 - - - 16’
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle
with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle
with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments
which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle
with a temperature of 40°C.
3) Synthetic program along: set wash cycle 5 with a temperature of 40°C.