Setup and user guide

6
CLEAN THE TANK
It is suggested to periodically remove the tank to clean it
(see Fig 12 and description below)
- unlock the lter (a) and remove it (b);
- remove the bottle balcony (c) then remove the tank (d) and
the gasket.
c
d
a
b
Fig 12
In case you decide to remove completely the water lter and
tank from your fridge, you can remove the whole lter and
the tank, using the balcony to normally store water bottles.
In this case please use the lter cap to cover the hole on the
balcony (see Fig. 13).
Fig 13
Wash the tank and the gasket with water only. At the end
of cleaning, mount the gasket on the water tank. Make sure to
correctly assembly the gasket on the tank (see Fig. 14).
Fig 14
Then mount the bottle balcony on the water tank and
assembly them on the door as suggested in Fig 15. Once
assembled, mount the lter with the carbon cartridge (as
described in Fig 5, 6, 7, 8).
Fig 15