Instruction for Use
GB
7
Wash cycles and functions
Wash functions
Stain removal
This function is particularly useful for the removal of
stubborn stains. Place extra compartment 4 (supplied)
into compartment 1. When pouring in the bleach, be
careful not to exceed the "max" level marked on the
central pivot (see figure).
To run the bleach cycle on
its own, pour the bleach
into extra compartment 4,
set the "Rinse"
programme and activate
the "Stain removal"
programme. To bleach
during a wash cycle, pour
in the detergent and any
fabric softener you wish to
use, set the desired wash
cycle and enable the "Stain removal" function.
The use of extra compartment 4 excludes the Pre-
wash function.
It cannot be used with the , , , , Pump out
and Drying programmes.
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal detergent removal is
guaranteed. It is particularly useful for sensitive skin.
It cannot be used in conjunction with the , ,
Pump out and Drying programmes.
For all Test Institutes:
* Test wash cycle in compliance with regulation EN 50229: set wash cycle with a temperature of 60°C.
Table of wash cycles
Easy iron
By selecting this function, the wash and spin cycles
will be modified in order to reduce the formation of
creases. At the end of the cycle the washer dryer will
perform slow rotations of the drum; the EASY IRON
indicator light will switch on, the START/PAUSE
indicator light will flash in an orange colour and the
text "END OF CYCLE" will appear on the display. To
end the cycle, press the START/PAUSE button or the
EASY IRON button.
For the Silk/Curtains cycle, the machine will end the
cycle while the laundry is soaking; the EASY IRON
indicator light will switch on, the START/PAUSE
indicator light will flash in an orange colour and the
text "STOP WITH WATER" will appear on the display.
To drain the water so that the laundry may be
removed, press the START/PAUSE button or the
EASY IRON button.
It may not be used with the , , , Pump out
and Drying programmes.
Mini load
This function is recommended for when the load of
laundry is equal to half, or less than half, of the
maximum recommended load (see Table of wash
cycles).
It cannot be used with the , , Pump out and
Drying programmes.
MAX
1
2
4
3
Description of the wash cycle
Max
.
temp.
(°C )
Max.
speed
(rpm )
Dry
-
ing
Detergents Max. load (kg)
Cycle
duration
Bleach Wash
Fabric
softener
Normal
Mini
Load
Everyday wash cycles (Daily)
C ottons (*)
(1
st
press of the button)
:
extremely soiled whites.
90° 1000
lll l
73
C ottons
(2
nd
press of the button)
:
heavily soiled whites and resistant colours.
60° 1000
lll l
73
Cottons
(3
rd
press of the button)
:
heavily soiled whites and delicate colours.
40° 1000
lll l
73
Synthetics
(1
st
press of the button)
:
heavily soiled resistant colours.
60° 800
lll l
31,5
Synthetics
(2
nd
press of the button)
:
lightly soiled resistant colours.
40° 800
lll l
31,5
Mix 30'
(1
st
press of the button)
:
to refresh lightly soiled garments quickly
(not suitable for wool, silk and clothes which require washing by hand).
30° 800
l
-
ll
3 -
Mix 15'
(2
nd
press of the button)
:
to refresh lightly soiled garments quickly (not
suitable for wool, silk and clothes which require washing by hand).
30° 800
l
-
ll
1,5 -
Silk/Curtains:
for garments in silk and viscose, lingerie.
30° 0 - -
ll
11
Memory:
allows for any wash cycle to be stored.
Wool:
for wool, cashmere, etc.
40° 800
l
-
ll
1,5 1
Drying programmes
Cotton dry
(1
st
press of the button)
- -
l
- - - 5 -
Synthetics dry
(2
st
press of the button)
- -
l
- - - 3 -
Wool dry
(3
st
press of the button)
- -
l
- - - 1,5 -
Partial wash cycles
Spin - 1000
l
- - - 7 -
Rinse
(1
st
press of the button)
- 1000
ll
-
l
73
Pump out
(2
nd
press of the button)
- 0 - - - - 7 -
The duration of the wash cycles can be checked
on the display.
Wash cycles
M