Instruction Manual

04-18
Specifications
Specifications
Features
Features
PC/104 2-slot PCMCIA Module
0°C ~ 60°C Complies with PCMCIA v.2.1 and JEIDA v4.2
Memory Programmable 8KB boot FLASH ROM
Interface 16-bit data bus
Indicator Busy status LED
Power Requirement +5V
PCMCIA Socket Supports Two Type 1/2 Cards or One Type 3
■■
Card
Bootable Function From Linear Flash Card, ATA Card and
■■
SRAM Card
ISA Interface
■■
TF-PCM-3115C•
PC/104 Board 2-slot PCMCIA Module
PCM-3115C
Ordering Information
PCMCIA Modules
PC/104 PCMCIA/ CompactFlash™ to IDE Module
Connector 40-pin IDE and 4-pin power connectors
Power Requirement +5V
Operating Temperature 32°F ~ 158°F (0°C ~ 70°C )
Allows System to Access the PCMCIA or CompactFlash™ ATA
■■
Card Directly as a 0°C ~ 60°C IDE Drive
Type 1/2/3 PCMCIA and Type 1/2 CompactFlash™ Cards
■■
No Driver Required
■■
TF-PCM-3116•
PC/104 IDE to PCMCIA/ CompactFlash™ Module
TF-PCM-3116PC•
PC/104 IDE to PCMCIA Module
TF-PCM-3116PC/F•
IDE to PCMCIA Drive with 3.5” Floppy Disk Drive Form Factor
Ordering Information
Mass Storage Modules
PCM-3116