SCS-4 Spec Sheet

General Information
Specications
Product Guide
SCS-4 Model Scullery Sinks are constructed of 14GA
or 16GA type 300 stainless steel with single or multi-
compartment bowls and double wall separators. Sinks
are mounted on 16GA, 1 5/8 stainless steel tubes with
stainless steel adjustable feet for leveling. Sink bowls
are coved at all corners and pitched to a 3 1/2” waste
cutout.
Full length backsplash is 10” high and holes for faucets
8” on center accommodates your choice of faucets.
The entire unit is nished with a satin brush nish.
Drainboard extensions are separately supported with
stainless steel legs, as required.
IMC Scullery/Service Sinks Model “SCS” are designed
for heavy duty application in large or medium
Institutional Facilities or where constant use is likely.
Options available are designed to make this product
suitable in a variety of locations in the facility for
applications, such as Deli, Vegetable or Bakery sinks
or for pot cleaning. For economy, specify 16GA instead
of 14GA.
DRAWINGS
IMC Teddy 50 Ranick Drive East Amityville, NY 11701 [phone] [e-mail] www.imcteddy.com
SCS-4 10 0121
SCS-4
4 Compartment Scullery Sink
Project Name:
Consultant:
Item #:
Model #:
Quantity:
Shown with Left & Right Drainboards
& Undershelves