User Manual

GB
49
5. At the end of the programmed cleaning time, the oven will automatically turn off.
- To stop the cleaning mode at any moment, press key.
- The Self Cleaning cycle cannot be selected if the door is open.
- If the door is in the open position when the function has already been selected and
the
key is pressed the latch doesn’t move, the “PADLOCK” icon will flash until
the door will be closed and the lock motor stops. When the “CLOSED PADLOCK” it
is displayed, the door cannot be opened.
- Check that the door has been locked, if door does not lock, press key and do not
start self-clean; phone for service
- Do not attempt to open the door while the cleaning cycle is running and the door is
locked.
To Change the Cleaning Time
1. To change the setting from 3 hours, select either 2 hours for light soil immediately after
starting.
2. To change the hours, touch the key, select and confirm with the key (the
hours will flash), use
or keys to change the value, then press to confirm the
new value.
3. To select the minutes, touch the
key (the minutes will flash), use or keys to
change the value, then press to confirm the new value.
To Delay the Start of Cleaning
1. Follow steps 1 through 3 above.
2. Touch the key and verify that “STOP TIME” appears on the display. The hours will
begin flashing, use or keys to change the value, then press to confirm the
new value.
3. To select the minutes, touch the key (the minutes will flash), use or keys to
change the value, then press to confirm the new value.
8. When the delay time expires, self-cleaning will start.
9. At the end of the programmed cleaning time, the oven will automatically turn off.