Installation Guide

ISSUED 05-2014
PACKAGE CONTENTS
1OF5
STYLE NUMBER: TST0092A
WARNING:
CAUTION:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching
off the circuit breaker or removing the fuse.
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb(s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
● Do not touch the bulb with bare hands use a cloth or glove.
WARNINGS AND CAUTIONS
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 20 - 30 minutes
● (1) 100W Type-A medium base bulb, Alternate (1) CFL bulb.
● Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire
Strippers,electricaltape,safetyglasses.
● 1-866-535-1869
● [e-mail]
● www.illuminadirect.com
Bulb Recommended:
Tools Required:
Phone #:
E-mail:
website:
PREPARATION
www.illuminadirect.com
1-866-535-1869
UM-TST0092A
E
A
B
D
C
PART
DESCRIPTION
QUANTITY
A
Crossbar Assembly
(Pre-assembled to fixture body)
1pc
3pcs
2pcs
1pc
Wire Connector
Outlet Box Screw
Fixture Body
C
D
E
1pc
Green Ground Screw
()Pre-assembled to Crossbar
B