SHUTTER MOUNTED EXHAUST FAN WITH THERMOSPEED (TM) CONTROLLER ILG8SF12V-ST/ILG8SF10V-ST OWNER'S MANUAL PLEASE READ AND SAVE THESE INSTRUCTIONS 1
PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. BEFORE YOU BEGIN WARNING! Installation, trouble shooting, and replacement of parts are to be performed only by authorized service technicians.
GENERAL SAFETY INSTRUCTIONS Fans are UL/CUL Listed, Standard 507. 1. Do not depend on any switch as the sole means of disconnecting power when installing or servicing the fan. 2. Always disconnect, lock-out, and tag-out power source before installing or servicing. Failure to disconnect power source can result in fire, shock, or serious injury. 3. Motor will restart without warning after thermal protector trips. Do not touch operating motor; it may be hot enough to cause injury. 4.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTION 1. The unit should be securely mounted in a rigid framework. NOTE: Allowing the fan frame to flex or move will result in excess vibrations, which may cause possible premature motor, propeller, or shutter failure. 2. Install any auxiliary components such as thermostats, switches, or speed controls. 3. Connect power to the motor using an approved wiring method. Refer to the following wiring diagram.
GENERAL SPECIFICATIONS Power source Mounting Position Frame Material Shutter Blade Material Propeller Material Agency Compliance 115V, 60Hz Vertical Galvanized Steel Aluminum Alloy Aluminum Alloy and Galvanized Steel UL/CUL 507 Dimensions (Inches) Product Specifications Model Voltage Frequency Wattage AMPS RPM CFM Suggested wall opening (Sq) ILG8SF12V-1 115V 60Hz 65W 0.
Product Specifications Model Voltage Frequency Wattage AMPS RPM CFM Suggested wall opening (Sq) ILG8SF10V-1 115V 60Hz 65W 0.
OPERATING INSTRUCTIONS 1. Keep the area free of objects that could impede air flow on both the intake and exhaust side of fan. 2. For proper exhaust operation, a window, door, or louver should be opened for fresh air intake on the opposite side of the area to be ventilated. 3. Turn the fan ON; the shutter will open automatically. When the unit is turned OFF, the shutter will close. 4. Speed controllable units are designed to operate at a minimum of fifty percent line voltage. MAINTAINANCE 1.
TROUBLESHOOTING Symptom Possible Cause(s) Dry motor bearings Loose propeller Excessive noise Fan inoperative Insufficient air flow Solution Re-lubricate motor bearings as per instructions or replace motor. Tighten set screws on propeller hub. Bent or damaged propeller Replace propeller Loose guard assembly or motor fasteners. Blown fuse or open circuit breaker Defective motor Tighten as required to 1520 lbs. per inch.
Warranty Information Register your product at our website: Or visit iLivingUSA.com/register-product Feedback Love it? Help us make the product more for you. Let us know with a customer review. Please visit: https://www.amazon.com/review/review-your-purchases# At iLiving USA, we are committed to bringing top quality products to our customers. iLIVING USA 860 Mahler Road, Burlingame, CA 94010 Tel: 1-800-317-1688 Email: service@ilivingusa.com Like us on Facebook: https://www.facebook.
