BLDC SHUTTER FAN OWNER'S MANUAL Models: ILG8SF12V-DC, ILG8SF14V-DC, ILG8SF16V-DC PLEASE READ AND SAVE THESE INSTRUCTIONS
PLEASE READ AND SAVE THESE INSTRUCTIONS. READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE, OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. BEFORE YOU BEGIN WARNING! Installation, trouble shooting, and replacement of parts are to be performed only by authorized service technicians.
IMPORTANT SAFETY INSTRUCTIONS 1. Do not depend on any switch as the sole means of disconnecting power when installing or servicing the fan. 2. Always disconnect, lock-out, and tag-out power source before installing or servicing. Failure to disconnect power source can result in fire, shock, or serious injury. 3. Motor will restart without warning after thermal protector trips. Do not touch operating motor; it may be hot enough to cause injury. 4.
INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTION 1. The unit should be only securely mounted in a rigid framework. NOTE: Allowing the fan frame to flex or move will result in excess vibrations, which may cause possible premature motor, propeller, or shutter failure. Fan frame and motor must be securely and adequately grounded to a suitable electrical ground, such as a ground water pipe or ground wiring system. 2. Install the shutter fan through 8 holes with screws. (Screws are not included.) 3.
4. Install the control box to the wall with 2 screws. (Screws are not included.) 5. Plug the power cord into a grounded wall outlet (120V, 60Hz). Plug the USB cord to connect with the control box.
Power source Mounting Position Frame Material Shutter Blade Material Propeller Material Agency Compliance 120V, 60Hz Vertical Galvanized Steel Aluminum Alloy Aluminum Alloy and Galvanized Steel CSA C22.2 No. 113 Dimensions (Inches) MODEL Prop. Dia.
Performance Model ILG8SF12V-DC ILG8SF14V-DC ILG8SF16V-DC Voltage 120 120 120 Frequency 60 60 60 Wattage 45 60 70 AMPS 0.65 0.85 0.99 RPM 1600 1600 1600 CFM 960 1200 1736 OPERATING INSTRUCTIONS 1. Keep the area free of objects that could impede air flow on both the intake and exhaust side of fan. 2. For proper exhaust operation, a window, door, or louver should be opened for fresh air intake on the opposite side of the area to be ventilated. 3.
About the Power ON/OFF & Mode button To turn on the shutter fan, press the button; the LED display will turn on and the shutter fan will wait in AUTO Mode. Press the button to toggle between the different modes: AUTO / Manual / TIMER / Power OFF. Press the button for 3 seconds can also Power off the fan. ATUO Mode AUTO mode is a computerized mode to optimize energy efficiency.
MANUAL Mode The manual mode is autonomous mode, and the fan will stop detecting the temperature and keep on blowing. In manual mode, press the or button can increase or decrease the fan speed. The fan speed range 0 to 12. TIMER Mode Press the TIMER button to set the Timer. The default value is 3 hours.The timer can be set from 0 to 24 hours. The fan will shut OFF automatically when the set time is reached. To turn the timer OFF, pressing the “–” button to set the time to 0.
MAINTAINANCE 1. Unplug the appliance before servicing. 2. Periodically clean off accumulated dirt from the propeller, guard, motor, and shutter. Do not depend on any switch as the sole means of disconnecting power when installing or servicing. If power disconnect is not visible, utilize OSHA Lock out/Tag out procedure. Failure to do so may result in fatal electrical shock. Employ proper lock-out/tag-out procedures when performing maintenance.
Warranty Information This product comes with a 1-YEAR LIMITED COMPONENT WARRANTY. If your unit does not appear to be working properly, please contact our service center by calling 1-800-317-1688. Prior to your call, we encourage you to visit our service related website www.ilivingusa.com for troubleshooting tips and service instructions if needed. Register your product at our website: Or visit iLivingUSA.com/register-product Feedback Love it? Help us make the product more for you.