Use And Care Manual
Customer Support: 1-888-999-4215
iLive | ITB066 v1971-01
Quickstart Guide
Plug the small end of the power cord into the DC Input on the back of the speaker,
and the large plug into a standard wall outlet.
Power
Indicator LightsRemote Batteries
Remote control: requires 1 CR2025 button cell type battery (included).
Pairing a Bluetooth Device for the First Time
1. Power on the unit by pressing the Power button.
2. Press the
button on the remote to switch to Bluetooth Mode, indicated by
a slowly ashing blue light. You can also press the Source button on the side of
the unit.
3. Press the Pair button on the side of the unit. The pairing indicator will ash
quickly. When pairing, remain within 3 feet of the unit.
4. Use the controls on your Bluetooth device to select ITB066 in your Bluetooth
settings to pair. If your device requests a password, enter the default
password 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing and
connecting Bluetooth devices.
5. When successfully paired and connected, a beep will issue from the soundbar
and the Pairing Indicator will display a solid blue light.
After initial pairing, the unit will stay paired unless unpaired manually by the user or
erased due to a reset of the device. If your device should become unpaired or you nd
it is unable to connect, repeat the above steps.
STATUS INDICATOR
Power O Red Light
Line In Mode Green Light
Optical Mode Amber Light
RCA/Aux In Mode White Light
Bluetooth Pairing Flashing Blue Light
Bluetooth Connected Blue Light
OPTICAL IN
DC IN
AUX IN RL