RENLIG DW60 GB
ENGLISH 4
ENGLISH 4 Contents Safety information Product description Control panel Washing programmes Use of the appliance Setting the water softener Use of dishwasher salt Use of rinse aid Loading cutlery and dishes Use of detergent 4 5 6 8 9 9 10 11 11 13 Setting and starting a washing programme Care and cleaning What to do if… Technical data Installation Water connection Electrical connection Environment concerns IKEA GUARANTEE 14 15 17 18 19 19 20 21 21 Subject to change without notice Safety information Fo
ENGLISH 5 Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance.
ENGLISH 6 Control panel 5 1 2 A 1 2 3 4 5 4 3 B On/off button Half-load button Programme selection/cancel button (SELECT/CANCEL) Indicator lights Programme indicator lights Indicator lights The indicator light comes on when the washing programme is completed. Auxiliary functions: • Level of the water softener. • Activation/deactivation the audible signals. • An alarm if the appliance has a malfunction. 1) 1) The indicator light comes on when it is necessary to fill the rinse aid.
ENGLISH Programme selection/cancel button Use the programme selection/cancel button for these operations: • To set the washing programme. Refer to the chapter 'Setting and starting a washing programme'. • To set the water softener. Refer to the chapter 'Setting the water softener'. • To deactivate/activate the audible signals. Refer to the section 'Audible signals'. • To cancel a washing programme in progress. Refer to the chapter 'Setting and starting a washing programme'.
ENGLISH 8 Washing programmes Washing programmes Programme Intensive Normal 1) Quick Eco 2) Hold Rinse & Degree of Type of load soil Programme description Half-load option Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying yes Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 65°C 2 intermediate rinses Final rinse Drying yes Normal soil Crockery, cutlery, pots and pans Normal or light soil Crockery and cutlery Main wash up to 60°C Final rinse no N
ENGLISH 9 The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance Refer to the following instructions for each step of procedure: 1. Make a check if the water softener level is correct for the water hardness in your area. If necessary set the water softener. 2. Fill the salt container with dishwasher salt. 3. Fill the rinse aid dispenser with rinse aid. 4. Load cutlery and dishes into the dishwasher. 5.
ENGLISH 10 You must set the water softener manually and electronically. Manual adjustment The appliance is set at the factory at position 2. 1 2 Set switch to position 1 or 2. Electronic adjustment The water softener is set at the factory at level 5. 1. Switch on the appliance. 2. Make sure that the appliance is in setting mode. 3. Press and hold the programme selection/ cancel button. 4.
ENGLISH 11 6 5 It is normal that water overflows from the salt container when you fill it with salt. Make sure that there is no grain of salt outer of the salt compartment. Use of rinse aid Caution! Only use branded rinse aid for dishwashers. Do these steps to fill the rinse aid dispenser: 1 2 Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). There is a risk of damage to the appliance.
ENGLISH – Remove all food remainings and debris. – Make burnt, remaining food in pans soft. • While you load cutlery and dishes, do these steps: – Load hollow items (e.g. cups, glasses and pans) with the opening down. – Make sure that water does not collect in the container or in a deep base. – Make sure that cutlery and dishes do not lie inside one another. – Make sure that cutlery and dishes do not cover other cutlery and dishes. – Make sure that glasses do not touch other glasses.
ENGLISH Adjustment of the height of the upper basket If you put large plates in the lower basket, first move the upper basket to the upper position. Maximum height of the dishes in : • Upper basket. – Upper position: 20 cm. – Lower position: 24 cm. • Lower basket. – Upper position: 31 cm. – Lower position: 27 cm. Do these steps to move the upper basket to the upper position: 1. Pull the basket out until it stops. 2. Carefully lift the two sides until the mechanism is engaged and the basket is stable.
ENGLISH 14 4 3 A B Do these steps to use detergent tablets: 1. Make sure that the detergent tablets are applicable for your water hardness. Refer to the instructions from the manufacturer. 2. Set the lowest levels of water hardness and rinse aid dosage. It is not necessary to fill the salt container and the rinse aid dispenser. Fill the detergent dis- If you use a washing penser (A) with de- programme with tergent. prewash phase, put more detergent in the prewash detergent compartment (B).
ENGLISH Warning! Only interrupt or cancel a washing programme if necessary. Caution! Open the door carefully. Hot steam can come free. Cancelling a washing programme 1. Press and hold the programme selection/ cancel button for approximately 3 seconds. – The programme indicator light goes off. – The end indicator light starts to flash. 2. Release the programme selection/cancel button to cancel the washing programme. At this time you can do these steps: 1. Switch off the appliance. 2.
ENGLISH 16 If the holes in the spray arms become clogged, remove remaining parts of soil with a cocktail stick. 4 3 2 1 A To remove filters B Remove the flat filter and C, turn the han- A from the bottom of dle approximately the appliance. 1/4 anticlockwise. 6 5 D 1 A Put the flat filter A in the bottom of the appliance. Install the flat filter correctly under the two guides D. Long periods of non-operation Do these steps when you do not use the appliance for a long period: 1.
ENGLISH 17 What to do if… The appliance does not start or stops during operation. If there is a fault, first try to find a solution to the problem yourself. If you cannot find a solution to the problem yourself, contact your dealer or the After Sales Service. Problem Possible cause Solution • Continuous flash of the light of the running programme. • Intermittent audible signal. • 1 flash of the end indicator light. Malfunction: The dishwasher does not fill with water.
ENGLISH 18 Problem Possible cause Solution The fuse has blown out in the Replace the fuse. household fuse box. After the check, switch on the appliance. The programme continues from the point of interruption. If the malfunction shows again, contact your After Sales Service. When the cleaning results are not satisfactory: Problem The dishes are not clean Possible cause Solution The selected washing programme is Set different washing programme. not applicable for the type of load and soil.
ENGLISH 19 Height (cm) 81,8-87,8 Depth (cm) Water supply pressure1) Minimum Maximum Capacity (place settings) 12 Energy class A Washing class A Drying class A Noise (dB(A)) 49 Average annual energy consumption (kWh) 2) 231 Average annual water consumption (litres)2) 3520 55,5 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) 1) If the pressure in your area is lower or higher, please contact your After Sales Service.
ENGLISH 20 Aqualock inlet hose The inlet hose is a high pressure resistant. It can hold pressure at maximum 6 MPa. From external the inlet hose has a sheathing against eventual damages. If the inner hose breaks, the water that is in the hose will became dark. You can see it across the special transparent sheathing. Turn off the water tap immediately and contact the After Sales Service. A If you connect the water drain hose to a water trap under the sink, remove the plastic membrane (A).
ENGLISH 21 This appliance complies with the E.E.C. Directives. Environment concerns The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment.
ENGLISH What will IKEA do to correct the problem? IKEA appointed service provider will examine the product and decide, at its sole discretion, if it is covered under this guarantee. If considered covered, IKEA service provider or its authorized service partner through its own service operations, will then, at its sole discretion, either repair the defective product or replace it with the same or a comparable product. What is not covered under this guarantee? • Normal wear and tear.
ENGLISH 2. ask for clarification on installation of the IKEA appliance in the dedicated IKEA kitchen furniture. The service won’t provide clarifications related to: – the overall IKEA kitchen installation; – connections to electricity (if machine comes without plug and cable), to water and to gas since they have to be executed by an authorized service engineer. 3. ask for clarification on user manual contents and specifications of the IKEA appliance.
Country België Belgique Phone number 070 246016 Call Fee Opening time Binnenlandse gesprekskosten 8 tot 20 Weekdagen Tarif des appels nationaux 8 à 20. En semaine България 0700 10 218 Такса за повикване от страната От 9 до 18 ч в работни дни Česká republika 246 019721 Cena za místní hovor 8 až 20 v pracovních dnech Danmark 70 15 09 09 Landstakst man.-fre. 09.00-20.00 lør. 09.00-16.00 1 søndag pr. måned, normalt første søndag i måneden 01803-334532 (0,09 € / Min.
156952750 -00-042010 © Inter IKEA Systems B.V.