User's Manual
Table Of Contents
- English
- Contents
- Safety information
- iRig Pro Duo I/O
- Register your iRig Pro Duo I/O
- iRig Pro Duo I/O overview
- Installation and setup
- Connecting an external power supply
- iRig Pro Duo I/O LEDs
- Direct monitoring
- Connecting microphones
- Connecting instruments
- Connecting monitors and headphones
- MIDI IN/OUT
- Setting input gain on iRig Pro Duo I/O
- Troubleshooting
- Specifications
- Warranty
- Support and more info
- Japanese 日本語
English
16
MIDI OUT
• Connect the 2.5mm-to-MIDI cable to the iRig Pro Duo I/O MIDI OUT port and to the MIDI IN port on, for
example, your sound module.
• Open a Core MIDI compatible application on your iOS device or on your computer.
• When iRig Pro Duo I/O is sending MIDI messages the MIDI LED will blink blue.
Setting input gain on iRig Pro Duo I/O
When talking or singing into your microphone, or when playing your instrument, check the audio level/status
LED of the corresponding channel on iRig Pro Duo I/O.
• If the LED is alternating between BLUE and GREEN, or is always GREEN, you should increase the iRig Pro
Duo I/O input gain by rotating the GAIN control clockwise.
• If the LED sometimes flashes RED, you should decrease the iRig Pro Duo I/O input gain by rotating the
GAIN control counter-clockwise.
• When your gain setting is optimal, the LED should alternate between GREEN and ORANGE while you play
or sing.