CEILING FAN USE AND CARE GUIDE
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Safety Information 1. To reduce the risk of electric shock, the electricity has been turned off at the circuit breaker of fuse box before begin. 2. All wiring must be in accordance with the National Electrical Code NASI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3.
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER THANK YOU FOR YOUR PURCHASE Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the product SAFETY TIP 1.
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Mounting Bracket Controller (4pcs) Expansion Bolts (4pcs) Self Tapping Screw Transmitter Wall Screw Holder Wire nut (3pcs) Screw Lock Pin Hanger Ball Canopy Canopy Ring Coupling cover 6” Downrod (20” Downrod & Extended wire ,standby) Bolt Clevis pin Nut Spring Washer Flat Washer Coupling Set Screws Pls check whether above accessories are completed
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 1. Install Mounting Bracket IMPORTANT : Screws & nuts must be tightened till snug. WARNING: To reduce the risk of fire,electric shock or personal injury, mount to an outlet box marked “Acceptable for fan support of 15.9 kg (35 lbs) or less” and use the mounting screws provided with the outlet box and/or support directly from building structure.
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 6. IMPORTANT : THE DOWNROD AND HANGER BALL SHOULD NOT ROTATE IF THIS STEP IS DONECORRECTLY. 7. 8. 3 1 2 4 Phillips screwdriver FROM POWER SOURCE AC 110-120VOLT 60Hz 3.5AMPS. 9. Hanger Ball 10. Mounting Bracket Use wire connecting nuts supplied with the fan.
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER TRANSMITTER SETTING To use factory pre-programmed setting - Skip the below programming steps. Insert battery (Not included) into transmitter, turn on the power supply to fan and it is ready to use. 0 R2 3 O 0 D 1 Battery (not included) 2 C LEARN 3V Read all the steps BEFORE proceeding.
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER TRANSMITTER FUNCTION Forward Fan rotates anti-clockwise creating a downward airflow delivering a cooling effect. Suitable for hot weather condition or air-conditioned condition. Reverse Fan rotates clockwise creating an upward airflow moving warm air off the ceiling areas. This function works best at lower fan speed.
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER SIZE OF PRODUCT 15.3 in 9.7 in 6 in 2.8 in Ø6.7 in 8 .
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER TROUBLESHOOTING GUIDE Table of Contents 1. Fan/ Transmitter is not working 2. Fan is noisy 3. Light is not working 4. Fan Wobbles Please refer to the instruction sheet for detailed directions and descriptions of installation steps and requirements. 1.
A559401CB110V Installation & Operating Instructions for the Parrotuncle Owner's Installation, Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER TROUBLESHOOTING GUIDE 4. THE FAN WOBBLES Verify all blades and blade bracket screws are secure (most fan wobble problems are caused by loose parts). Once fan is properly installed, run the ceiling fan for 10 minutes to let the fan self-adjust.