User Manual

2
5. Once you have a device paired and would like to pair a different device with the speaker then
press and hold down the play/pause button to cut off the connection. Then pair the new
device.
Operation instruction
1.
Switch: Turn on/off
2.
(M)Mode: Press this button to switch between Bluetooth mode - TF Card mode - FM mode - Line in
mode.
3.
Volume/Next song/Previous song button: Press once to play next/previous song. Press and hold
down to increase/decrease volume.
4.
Play/Pause/Phone button: Press once to play or pause music. Press to answer and hang up a phone
call. Press and hold to reject a phone call when a call is coming in. Double click to redial the last
phone number. Press and hold to cut off the Bluetooth connection with a device or also if you wish
to pair the speaker with a different device.
5.
The built in microphone supports wireless hands free calling. Press the phone button to receive and
hang up calls
6.
When in Micro SD card mode use the previous and next button to switch songs.
7.
FM Radio configuration:
o
Press M button with Bluetooth/TF/Line in to switch to FM Radio mode
o
Press and hold for about 2 seconds the Pause/Play button and the speaker will
automatically search for FM radio channels. The speaker saves these channels.
o
Once searched you can then press the Next or Previous button to change the channels
o
If the reception is poor please put the USB cable into the speaker and search again for FM
stations. The USB cable acts as an antenna booster
8.
Line in: Playing music via audio cable
o
Connect the micro USB end of the cable to the speaker;
o
Connect the 3.5 mm end to a mobile/laptop etc. audio device
o
Play the music on your mobile//laptop etc. audio device
9.
Line out: Put your earphone end to the 3.5 mm jack on the speaker, then can enjoy the songs
Charging the Speaker
1. Connect the plug to the micro USB charging port of the speaker.
2. Connect the standard USB plug end of the cable to a power USB port on a computer or other
USB charging device. For first time use, a full charge is recommended.
Troubleshooting
Symptoms Speaker can't be
powered on
Not able to pair w/ the
speaker
Volume too low
Causes Low battery level Speaker already on or
not in pairing mode
Battery is not charged up or Volume
is not set to the maximum on the