Instruction Manual

u IBX-210-CV-N2600 Embedded System
Page 96
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the uIBX-210-CV-N2600.
A.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
A.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
 Follow the electrostatic precautions outlined below whenever the
uIBX-210-CV-N2600 is opened.
 Make sure the power is turned off and the power cord is disconnected
whenever the uIBX-210-CV-N2600 is being installed, moved or modified.
 Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
 Electric shocks can occur if the uIBX-210-CV-N2600 chassis is opened
when the uIBX-210-CV-N2600 is running.
 Do not drop or insert any objects into the ventilation openings of the
uIBX-210-CV-N2600.
 If considerable amounts of dust, water, or fluids enter the
uIBX-210-CV-N2600, turn off the power supply immediately, unplug the
power cord, and contact the uIBX-210-CV-N2600 vendor.
 DO NOT:
o Drop the uIBX-210-CV-N2600 against a hard surface.
o Strike or exert excessive force onto the LCD panel.
o Touch any of the LCD panels with a sharp object
o In a site where the ambient temperature exceeds the rated temperature