Installation Guide

idh
by St. Simons, Inc.
Professional Grade Quality Solid Brass Decorative Hardware & Bath Accessories
Demand Quality, Demand idh
idhbrass.com
Installation Instructions
Professional Grade Quality Solid Brass
10” Casement Adjuster
Item# 21001
Dimensions:
• Overall Length: 10-3/4”
• Arm Length: 10-1/4”
• Projection: 1-15/16”
• Rod Diameter: 3/8”
• Knob Diameter: 1-1/16”
• Net Weight: 10.5 oz.
• Gross Weight: 12.5 oz.
• Solid Brass Wood Screws
Dimensions are for reference use only.
For exact dimensions, please measure actual part.
Installation Instructions:
1. Position casement adjuster on window sill flush to
bottom rail, leaving ball end or rod a minimum 1/2”
from window frame.
2. Mark and drill pilot holes in mounting piece and base.
3. Pull rod inward and secure mounting piece to window
and base to sill.
Note: To keep in desired open position, tighten knob
Catalog Section: E
10” Casement Adjuster
Item# 21001
Date: Rev 02/18