Instruction Guide

INSTRUCTION GUIDE
SMART
LED LIGHT BULB
Product Introduction
Remote switch
Group control
State feedback
Dimming
Adjust atmosphere
Voice control
Specification
Name
Color
System Support
Power
Working environment
Characteristics
Input parameters
Material
Size
Smart LED Light Bulb
White light + colorful
Android、iOS
10W
Home, office
Free toning, Remote control
100~250V AC, 50-60Hz
PC+ABS
62x62x114mm
Install the light bulb
Install the bulb as shown in the picture and turn on the power switch.
Note:
1. When installing, removing or inspecting the lamp. Please make sure the
power is off .
2.Do not use fixtures to be dimmered to avoid damaging the product.
3.Do not use in damp environments.
4.Not recommended for use in narrow sealed barrel shades to avoid
signal or heat dissipation problems.
1
2
3
Mobile APP download
1. Scan your QR code with your phone, Or in the APP store, application market;
2. Search for “ELFstorm APP” Download and install;
3. Sign up and log in to the“ELFstorm APP”.
Pairing operation Pairing operation Pairing operation
4. Click "Setup" after entering the APP.
5. Select product category "LED Bulb" and click to enter its interface.
Note: the product can only be used after connecting to 2.4g network. The 2.4g
network can be set on the router.
Scanning download ELFstorm APP
Support：
Android iOS
6. Connect the LED bulb to the power supply, and power
the product/power off for 3 cycles (when the light is on,
the power will be quickly cut off and then power will be
restored). The light will flash quickly, indicating that the
LED bulb has entered the distribution network state.
7. Return to the mobile APP interface and click "Next" to
enter the interface of connecting to Wi-Fi.
8. Enter the Wi-Fi password for the connection and click
"Start configuration".
8. Display the device network connection is successful and click "Done"
to enter the main page.
9. Click "My Devices" on the main page to enter, and the currently
connected products are displayed on the interface.
Pairing operation
10. Click the connected product icon, and you can control the corresponding
functions of the product after entering.
11. In order to facilitate voice search of products and voice control in
amazon APP, first modify the product name (for example: smart light), click
the icon " "in the upper right corner of the product main interface.Enter
the modify screen.
Voice interaction skill authorization Voice interaction skill authorization Voice interaction skill authorization Voice interaction skill authorization
1. Download Amazon Alex APP, register and log in. Enter Amazon Alex
APP and click the menu button in the upper left corner .
2. Click "skills & Games".
Note: in order to realize voice control, smart speaker must be equipped
and voice authorization must be carried out:
menu
3. Click the search icon “ ”
4. Input the name of the skill (such as ELFSTORM), search for ELFSTORM,
and click "ELFSTORM".
search
5. Click "ENABLE TO USE"
6. Enter the account and password of ELFSTORM App.
7. Close the page after the successful skill link, and the page of "Discover
Devices" will appear and click enter (after the skill activation, you can also
control the Echo speaker to search the device)
8. Alexa App searches for currently connected smart products.
9. Found products appear in the "Lights" page of Alexa App's "Devices"
page, which can be controlled by voice, such as "turn on smat light, or
turn off smart light".
Click the control
switch for
three loops
FCC Warning
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Statement
The contents of this manual are subject to change due to product version
upgrade or other reasons. Our company reserves the right to modify the
contents of this manual without any notice or prompt. This manual is
intended as a guide only. We do our best to provide accurate information
in this manual. However, we do not ensure that the contents of this manual
are completely error-free. All statements, information and recommenda-
tions in this manual do not constitute any express or implied. guarantee.
Items list
• WiFi Smart LED Bulb x 1
• Operations Guide x 1
Warranty Explain
Thank you for purchasing this product. In order to protect your rights,
please read the following items carefully: According to national policy
standards, our company's product warranty period is 1 year (Calculated
from the date of purchase, Unable to verify the date of purchase, subject
to the date of manufacture). Within warranty period, Our company will
give a free warranty for any malfunction caused by the quality of the
product itself under normal circumstances.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment.
This transmitter must not be coÿlocated or operating in conjunction with
any other antenna or transmitter.
This equipment should be installed and operated with minimum distance
20cm between the radiator& your body.