User's Manual

24
<1> KEY?
“SYSTEM
INITIALIZED!!!”
Power ON
Initialize OK?
1: Yes 0: No
Normal Operation
Yes
No
Press and hold the
initialization button. Put the
+12V DC power to the LX505.
Release the button when the
LCD displays “Initialize OK?”
Figure: RS232 Communication between the LX505 and a Serial Printer
10. Basic Setting
10.1 Initialization of LX505
After the installation and connections are completed, supply power (+12V DC) to LX505 with
the initialization button being held down. Then, the LCD will first display “Initialize OK? 0:No
1:Yes”. Press <1> key if you want to initialize the system. After all the initialization process is
completed, the system will be operating on the normal mode and the LCD will display
“IDTECK, LX505 [F1], Date Time”.