User Guide

 Clicktheappropriatenetwork.
 Typethepasswordintheavailablefield,thenclickConnect.
 Thenetworkselectedappearsatthetopofthelist,withanindicationthetimeclockis“connected”tothe
wirelessnetwork.


ETHERNETCONNECTION
Connectyourtimeclockdirectlytoyournetworkforafasterandmorereliableconnectionthanwirelesscanoffer.
 PlugoneendoftheEthernetcable,providedinthepackage,toanavailableportonyourrouter,DSL
modemorswitch.
 ConnecttheotherendtotheEthernetport
onyourtimeclock.
 Plugthetimeclockintothepower.Waitforthetimeclocktofullybootup,itwillstateEnterIDNumber.
 EnterSupervisorModeatyouremployeetimeclockterminal.
 Pressonthetimeclock.
 Enteryoursecuritycode.Thedefault
securitycodeis000000.



Note:Ifthereisawirelessnetworkinrange,you’llbepromptedtoconnectedtothewirelessnetwork.
PressCleartocancelandmovetothenextstep.