Operation Manual

New2001
14
New2001
SCAN OPERATION (Except for the Dutch version)
5
■ Scan types
Scanning is an efficient way to quickly locate signals over a
wide frequency range. The transceiver has a priority scan set-
ting and normal scan setting.
In addition, the “Weather alert*” and “Auto scan” functions are
also selectable for scanning. These functions can be simul-
taneously activated, depending on the settings in the SET
mode.
(pp. 26, 27)
* For only the USA, EXP, and AUS versions.
Set the Favorite channels (scanned channel) before scanning.
Clear those Favorite channels which are not needed or incon-
veniently stop scanning, such as digital communications.
Choose priority or normal scan in the SET mode. (p. 26)
NORMAL SCAN
CH 01 CH 02
WX*
CH 05 CH 04
CH 03
* Previously selected weather channel
when weather alert function is ON.
Normal scan, like priority scan, sequentially searches
through all Favorite channels. However, unlike priority
scan, Channel 16 is not checked unless it is set as a Fa-
vorite channel.
PRIORITY SCAN
WX*
CH 01
CH 16
CH 02
CH 05 CH 04
CH 03
* Previously selected weather channel
when weather alert function is ON
Priority scan sequentially searches through all Favorite chan-
nels while monitoring Channel 16. When a signal is detected
on Channel 16, the scan pauses until the signal disappears;
when a signal is detected on a channel other than Channel
16, scan becomes Dualwatch until the signal disappears.