Tuzio® Avento Towel Warmer Installation Guide Code: E3203 / E3204 / E3205 / E3206 23.5” x 31” Electric Plug-In Technical Helpline: Toll-Free 1-877-757-8990 www.icocanada.
Towel Warmer Installation Procedure 1 Rough-in Requirements (see figure 3) 1. A 110V receptacle located no further than 18” from electric plug-in exit location on towel warmer (see fig. 2), and not above electric plug-in exit location. 2. Wall studs or plywood backing is required in the wall at all bracket locations. See figure 2 for bracket locations. 2 Installation Instructions (see figure 1) 1. Check all items have been received. You should have Towel Warmer and mounting bracket kit.
Specifications & Drawings Model # Description Finish Weight (lb) Element Output Size WxH (mm) WxH (Inches) Metal Type E3203 Avento Electric Plug-In Chrome 25.3 150W 1389Btu 600 x 790 23.5” x 31” Mild Steel E3204 Avento Electric Plug-In Brushed Nickel 25.3 150W 1389Btu 600 x 790 23.5” x 31” Stainless Steel E3205 Avento Electric Plug-In Matte Black 25.3 300W 1389Btu 600 x 790 23.5” x 31” Mild Steel E3206 Avento Electric Plug-In Polished Nickel 25.
Towel Warmers Electric In-Floor Heating Insulation Board