User's Guide

Wireless Repeater 1200M-ZJQ User Guide

WPS button on the front

Rset button on the side

Reset

Button

After pressing and holding the Reset button for more than 5 seconds, when the

Repeater LED blink quickly, the repeater will be restored to the factory settings. At

this time, you can release the button and the repeater will automatically reboot.

WPS

Button

Press the WPS button, and then press the WPS button of the main router, the

repeater will automatically connect to the main router via WPS. After the

connection is successful, the repeater LED will be on.

1.4 Stickers

2 Use your mobile phone to configure repeater

2.1 Repeater settings

Step 1 Plug the repeater into the power socket and wait for the WiFi LED to blink and the

repeater is started.

Step2 Use your mobile phone to search for and connect to the wireless network of the

repeater: XY1200AC_XXXX or XY1200AC_5G_XXXX。