Product Manual

Page 13 Ver 4
Typical control panel layout for Single & Three phase machine.
engine is refueled or where the fuel is stored.
• Do not overfill the diesel tank and make sure the filler cap is
securely closed after refueling.
• Take care not to spill fuel when refueling. If any fuel is spilled,
make sure the area is clean and dry before starting the engine.
Wear suitable PPE, suggested but not limited too
3.1. Selection and handling of fuel.
3.1.1. Selection of fuel.
3.1.1.1. Only use standard specification diesel, this can be red or white.
3.1.1.2. Keep dust and water out of thefuel.
3.1.1.3. When filling the fuel tank from drums, make sure that no dust or water is
mixed in with the fuel. This can cause serious damage to the fuel injection pump
or the injector nozzle.
3.1.1.4. Do not overfill. Overfilling can potentially be very dangerous. Diesel can
expand in hot weather and overflow
3.1.1.5. Always leave a 25mm gap above the fuel level.
3.
PREPARATION for
STARTING
DO
NOT
refill
tank
while
engine
is
running
or
HOT.
Do
not
smoke
or
allow
flames
or
sparks
in
the
area
where
the
DO
NOT
EXCEED
INDIVIDUAL
SOCKET
AMP
RATINGS.