User's Manual

VOICE COMMAND SYSTEM 5-5
VOICE COMMAND SYSTEM
4.
Once the icon changes into the
icon on the pop-up screen with a beep
sound, say "Yes".
5. Listen and repeat the 20 commands
(approximate) as instructed by the device.
●
Reset Speaker adaptation: Returns to previ-
ous state prior to applying Speaker adapta-
tion.
1. Press the
key on the steering wheel
remote controller.
2. Once the
icon changes into the
icon on the pop-up screen with a beep
sound, say "Reset Speaker adaptation".
5-6 VOICE COMMAND SYSTEM
PART 5 VOICE COMMAND SYSTEM
Voice command list
The voice commands for this system are divid-
ed into Global commands and Local com-
mands.
●
Global command (
󱇫
) : Commands which
operate in all operating modes.
●
Local command (
󱇪
) : Commands which
operate only when the corresponding
mode is operating or when the mode
screen to the corresponding mode is dis-
played.
Command list of Audio system
FM/AM Radio
Command Operation
㿋
Radio
Plays the most recent frequency for the most recently
operated band.
㿋
(Radio) AM
Plays the most recent frequency for the corresponding
band.
㿋
(Radio) FM
Plays the most recent frequency for the corresponding
band. In the case of FM, the most recent frequency
within the most recently played FM1 or FM2 band is
played.
㿋
FM <1 or 2>
Plays the most recent frequency for the corresponding
band.
㿋
AM frequency <530 to 1710>
(ex. AM frequency 1310)
Plays the desired AM band frequency.
㿋
FM frequency <87.5 to 107.9>
(ex. FM frequency 99.1)
Plays the desired FM band frequency.
㿋
AM Preset <1 to 6> Plays the desired AM band preset frequency.
㿋
FM <1 or 2> Preset <1 to 6>
Plays the desired preset frequency of FM1 or FM2
band.
㿊
Preset <1 to 6>
Plays the desired preset frequency for the current
band.
㿊
Seek Up
Searches and plays the next frequency of the current
band.