User's Manual

PREOVERVIEW
2-15
PRE-OVERVIEW
Although this device supports low bit rate
MP3 tracks, such tracks may only provide
low quality sound.
For stable operation, the use of files in
95kbps ~ 192kbps bit rate range and
44.1kHz SAMPLING frequency is recom-
mended.
Inserting/Ejecting Disc
Inserting a Disc
Insert the disc into the slot.
The disc will begin playing automatically after
it has been inserted.
INFORMATION
If the operation mode had been Audio mode
before inserting the disc, the device will con-
vert to the DISC mode screen and begin play-
ing.
If the operation mode had been Navigation
mode, then Navigation mode screen will
remain and the disc play status will be dis-
played through the Audio bar.
Ejecting a Disc
Press the key.
The disc will immediately be stopped and
ejected.
INFORMATION
If the operation mode had been in Audio
mode before ejecting the disc, the device
will be converted back to Audio mode.
If the operation mode had been in
Navigation mode, then Navigation mode
screen will remain.
If the disc is straddled on the slot without
removing for approximately 10 seconds, the
disc will be re-inserted automatically into
the disc player.
In such a case, the disc will not begin play-
ing automatically.
PART 2 AUDIO SYSTEM
2-16
CD
Listening to CD music
1. Insert the CD or press the
0(',$
key on the
control panel if the CD is already inserted.
2. Select the desired track.
[Selecting the
CD track], page 2-15.
Voice Command
1. Press the key on the steering wheel
remote controller.
2. After the beep sound, say a command.
"DISC"
"CD"
"CD Track <1 to 665>"
CD screen and functions
Mode display : displays that the current
mode is CD mode.
REPEAT/RANDOM/SCAN indicator : if
REPEAT/RANDOM/SCAN is operating, the
switch is displayed.
Track number : displays the track number.
Play Time : displays the play time.
Current time : displays the current time
manually automatically according to the
GPS time.
D
5HSHDW
buttons : repeat the current play-
ing track.
[Setting Repeat function for CD music],
page 2-15.
E
5DQGRP
button : plays the tracks on the
disc in random order.
[Setting Random function for CD music],
page 2-16.
F
6FDQ
button : scans all tracks on the
disc for 10 seconds each.
[Scanning CD track], page 2-16.
G
6RXQG
button : adjusts the FAD/BAL,
BAS, MID, TRE controls.
[Sound setting], page 1-10.
Selecting the CD track
There are 2 ways to select a CD Track - (a)
selecting through Track Up/Down, (b) select-
ing through searching Track.
(a) Selecting through Track Up / Down
Press the
key on the control panel
or steering wheel remote controller for less
than 0.8 second. The next or previous track
will begin playing.
D F
E G