User's Manual

13
dealer) elapses, even if you have released the PTT key.
TOT Rekey Time
The feature is used to set the duration until transmission is allowed after returning to
receive by TOT. When enabled, transmission will be prohibited until preset time elapses
(programmable by your dealer).
TOT Alert Time
When this feature (programmable by your dealer) is enabled, the radio will sound an alert
at the preset time. Transmission will be prohibited by the TOT after this time.
Battery Save
When there is no activity on the channel and no operation is performed for 10 seconds,
Battery Save feature is automatically activated. When a signal is received or an operation
is performed, Battery Save feature is automatically deactivated.
Low Battery Alert
Low Battery Alert alerts you to recharge or replace the battery.
During transmission, when the battery voltage goes below a preset value, the LED
indicator will flash red. When the alert tone sounds, the radio stops transmitting. Please
recharge or replace the battery.
Monitor
Press and hold Monitor key to monitor activities on the current channel. This operation is
especially useful for adjusting volume level or receiving a weak signal.
The LED indicator will glow green while the Monitor key is held down.
High/Low Power
In receive mode, briefly press Monitor key to toggle between high and low power. Three
beeps alternating from high tone to low tone indicate that the transmit power is switched
from high to low; and three beeps alternating from low tone to high tone indicate that the
transmit power is switched from low to high.
Wide/Narrow Channel Spacing Compatible
The dealer can select wideband or narrowband via PC programming software.