User's Manual

Loosen the screw to remove the belt clip. Please refer to the operations for attaching the

belt clip.

Attaching/Removing the Battery When the Belt Clip is Attached

When the belt clip is attached to the radio, please first press the belt clip to make its

bottom up, and then attach/remove the rear cover and battery by the steps mentioned

above, as shown in Figure 7.

Figure 7

Attaching/Removing the Earpiece/Mini USB

Attaching the Earpiece/Mini USB

1. Open (not remove) the accessory cover, plug the audio accessory firmly into the

accessory jack, and the Mini USB into the USB jack, as shown in Figure 8.

Figure 8

Removing the Earpiece/Mini USB

Open the accessory cover, and then remove the earpiece or Mini USB.

Note: Use of audio accessory may affect the waterproof performance of the radio.