Use and Care Manual

Hydrofarm T-5 Commercial System Instructions
Parts:
• T-5 Fluorescent fixture…………………………..x 1ea.
• T-5 Bulbs (depending on model)………………...x 4, 6, or 8ea.
Color Temperature: 6400K
Size: 2 or 4 foot
• Hanger hooks…………………………………….x 2ea.
Specifications
Volts: 120v / 60Hz
Cord length: 10’ grounded power cord
Dimensions Weight Lumens (up to)
2’ 4 Lamp: 3”H x 13½"W x 23"L 11.6 LBS 8000
4’ 4 Lamp: 3”H x 13½"W x 46"L 21.1 LBS 20,000
6 Lamp: 3”H x 19½"W x 46"L 26.3 LBS 30,000
8 Lamp: 3”H x 26"W x 46"L 31.4 LBS 40,000
Watts Amps
2’ 4 Lamp: 89w 0.74A
4’ 4 Lamp: 248w 1.98A
6 Lamp: 342w 2.85A
8 Lamp: 454w 3.78A
Installation
1. Carefully remove all of the components from the box and the protective foam to
ensure that your Hydrofarm T-5 Fixture box includes the above parts.
2. Inspect the included components for any damage, missing parts, or other
concerns. Contact your local retailer in order to get a replacement or new part if
required.
3. If there is a protective film on the reflector surfaces, be sure to remove it
completely prior to installing the bulbs.
4. Before installing the T-5 fluorescent bulbs remove the cardboard and inspect each
socket end on the fixture to ensure it is ready to receive the pins on the bulb ends.
Gently align the pins vertically upon inserting in each socket and once all the way