Ride-On Lawn Mower Workshop Manual

English-23
DELIVERY SERVICING
12. Fill the gasoline tanks (unleaded
gasoline with no oil and a minimum
octane rating of 87).
Environment-friendly, acrylate gas , e.g.
Aspen, can be used to good advantage.
13. Select tank by moving the selector to the
appropriate position.
14. Connect exhaust fume extraction.
15. Start the engine.
16. Check that there is drive to both wheels.
17. Vent the hydraulic system.
18. Check that, with the motion control levers
in the neutral position, both rear wheels
are stationary.
19. Remove the blocks supporting the back
end.
20. Raise the mower deck to its highest
position.
21. Raise the back of the baseplate and
drive the mower forwards and off.
22. Check mower deck settings as per the
instructions (see ”Adjusting Motion
Control Lever Linkages” on page 34).
WARNING!
Gasoline is highly flammable.
Take great care.
8011-550
Fueling
8011-506
Selecting the gasoline tank
WARNING!
Never run the engine indoors in
confined or poorly ventilated
areas. Exhaust fumes contain
carbon monoxide (poisonous).
8011-507
Air relief screw for the hydraulic system