Garden Tractor Owner's Manual

SERVICE AND ADJUSTMENTS

CAUTION: After rear lift links are dis-

connected, the attachment lift lever will

be spring loaded. Have a tight grip on

lift lever when changing position of

the lever.

• Turn tractor steering wheel to the left as far as it will

go.

• Slide mower out from under right side of tractor.

• Turn steering wheel to position wheels straight for-

ward.

• ATTACH FRONT LINK (E) - Work from left side of trac-

tor. Insert rod end of link assembly through front hole

in tractor front suspension bracket (F) and secure with

retainer spring (G) through hole in link located behind

the bracket.

• Insert other end of link (E) into hole in front mower bracket

(H) and secure with washer and retainer spring (J).

TO INSTALL MOWER (See Figs. 18-22)

Be sure tractor is on level surface and engage park ing

brake.

• Lower attachment lift lever to it's lowest position.

CAUTION: Lift lever is spring loaded.

Have a tight grip on lift lever, lower it

slowly and engage in lowest position.

• Turn steering wheel to the left as far as it will go and

position mower on right side of tractor with deﬂ ector

shield to the right.

• ATTACH REAR LIFT LINKS (C) - Lift rear corner of

mower and position slot in link assembly over pin on

rear mower bracket (D) and secure with washer and

retainer spring.

• Repeat on opposite side of tractor.

NOTE: Be sure mower side suspension arms (A) are pointing

forward before sliding mower under tractor.

• Slide mower under tractor until it is centered under

tractor.

• ATTACH MOWER SIDE SUSPENSION ARMS (A) TO

CHASSIS - Position hole in arm over pin (B) on outside

of tractor chassis and secure with washer and retainer

spring.

• Repeat on opposite side of tractor.

02965

FIG. 18

FIG. 19

02965

FIG. 20