Operators Manual

MAINTENANCE
40 - Husqvarna
Cutting Blades
To achieve the best mowing effect, the blades must be
well sharpened and not damaged.
Bent or cracked blades or blades with large nicks
should be replaced.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown. Let the service
workshop decide whether the blade can be repaired/
ground or must be replaced.
Balance the blades after sharpening.
Check the blade mounts.
WARNING!
Blades are sharp. Protect your
hands with gloves and/or wrap
blades with a heavy cloth when
handling.
IMPORTANT INFORMATION
The sharpening of blades should be
carried out by an authorized service
workshop.
8011-604
Check the cutting blades
8011-671-4
Blade attachment
Blade replacement
Remove blade bolt by turning counterclockwise.
Install new or resharpened blade with stamped
“GRASS side” facing towards ground/grass (down) or
“THIS SIDE UP” facing deck and cutter housing.
Install and tighten blade bolt securely. Tighten torque
90 ft/lb (122 Nm).
IMPORTANT INFORMATION
Special blade bolt is heat treated.
Replace with a Husqvarna bolt if
required. Do not use lower grade
hardware than specied.