User's Manual

English- 27
OPERATION
Push Models Only
Model: W21K, W21KC
Prepare the area before mowing. Look for
obstacles, remove foreign objects and clear
the work area of pets and bystanders. Check
the equipment for fuel, oil, loose fasteners
etc. Make sure the equipment is in top shape.
Correct any defects before using the mower.
Set choke control to “ON” position.
Engage Operator Presence Control (OPC).
Start engine by pulling briskly on starter rope.
Set throttle control to high speed.
When finished mowing release OPC bail to
stop blade rotation and stop engine.
1
2
Choke “ON”
1. OPC bail
2. Starter rope
Set throttle to high speed
1
1. OPC bail
8019-034
8019-032
8019-031
8019-033
Release OPC bail
Start engine