User Guide

11
These signs will give
advice for your safety
Before leaving our factory every machine is thoroughly
tested.
Follow our instructions strictly and your
machine will give you long service in normal
operating conditions.
I N S T R U C T I O N
INDICATION
INFORMATION
WARNING
PROHIBITION
Use: Sawing of any kind of tile, up to 31” (787mm).
Diagonal on 22” x 22” (559 x 559mm) tile.
Tools: Rip Guide comes standard on all tile saws.
See Tile Cutting Accessories on page 19.
(For information or availability of other accessories con-
tact your Husqvarna supplier.)
Blade Capacity: Rim Ø 10” (254mm) - bore 5/8”
(15,9mm).
Prole Wheel: Rim Ø 6” (152mm) - bore 5/8”
(15,9mm).
Blade Rotation: Counter-Clockwise (CCW).
Depth of Cut: 3-3/4” (95mm) with 10” (254mm) blade.
Horsepower: 1-1/2 1-1/2
Voltage: 115 115/230
Hertz: 60 60
F.L. Amperages: 14.6 17.2/8.6
Blade Shaft RPM: 2760 3880
Weight: lb. (kg.) 105 (48) 110 (50)
Dimensions - L x W x H: in 51-1/4” x 26-7/16” x 22-
5/4”
(mm) (1,302 x 671 x 575)
Conveyor Cart - L x W: in (mm) 16 x 16-1/2” (406 x
419)
Pan Holding Capacity: 12 gallons (46.1 liters)
Water Pump Output: 100 gal/hr. (378 l /hr.) Standard
300 gal/hr. (1135 i/hr.) Optional
The operator must wear
p r o t e c t i v e c l o t h i n g
appropriate to the work he
is doing.
Any persons not involved in the work should
leave the area.
Use only blades marked with a maximum
operating speed greater than the blade shaft
speed.
Before starting up the machine, make sure
you read this entire manual and are familiar
with the operation of this machine.
The working area must be completely clear,
well lit and all safety hazards removed.
1 Features
2 Benets
3 Machine Set-Up
• Thenew,improvedbladeguardofferssimpliedblade
installation and removal - maximum 10” (254mm)
blade capacity. The external water tube assembly (L)
is removable for easy maintenance.
• 1-1/2 HP, High Torque (HT) 115V/60/1 motor on
standard saw.
• The dependable, high volume, submersible coolant
pump features a screened intake.
• The motor and pump power cords are securely
mounted directly into the motor housing.
• The removable Drain Plug (C) at the front end of the
pan permits easy coolant draining and quick sludge
clean out. The Water Pan (2) is removable for easy
cleaning.
• The free-rolling Conveyor Cart (4) is aligned for
straight, smooth cuts. The Backstop with ruler allows
fast mounting and adjustment of the Rip Fence (S)
and optional accessories. The Cart comes standard
with a 5-1/4” end Extension for supporting longer
tile.
• Makes diagonal cuts on 22" x 22" (559 x 559 mm)
tile. Can make 31” (787mm) rip cuts.
• Full-size belt shield and belt protection.
• The adjustable Water Pan (2) allows the operator to
cut tile comfortably with a full view and control of work
See Figure 1
• Remove all items from the shipping carton and
identify:
1. Cutting Head Assembly (1): Includes Water Tube
Assembly (L)
2. Frame Assembly (1) with Lockbar (G) & Sprig-
assisted Plunge Assembly.
3. Water Pan Assembly (2)
4. Conveyor Cart Assembly {Cart Assembly (4) and
Rip Guide (S)}
5. Water Pump and Accessory Carton: Includes
Water Pump (H), Hose Barb (J), Water Valve
(K), 15/16” Wrench (E), Drain Plug (C), Locking
Knob(F)with5/16”atwasher,BearingCaps
(D) with 5/16” Capscrews & Flatwashers.
6. Literature Assembly Envelope
NOTE:Checkthecartonandallpackingllerforloose
parts and optional accessories (if ordered).