Operation Manual
16
1
A
B
C
D
E
Getting ready to se
w
Threading the upper thread
Make sure the presser foot is raised and the needle is in the up
position.
Press the ON/OFF switch to “O”.
1. Place the thread on the spool pin and the spool cap on the
spool pin as described on page 11.
2. Spool pin in horizontal position:
%ULQJWKHWKUHDGRYHUDQGEHKLQGWKHSUHWHQVLRQWKUHDGJXLGH
$DQGXQGHUWKHWKUHDGJXLGH%
Spool pin in vertical position:
,QVWHDGRI EULQJLQJWKHWKUHDGLQWRWKHSUHWHQVLRQJXLGH$
EULQJLWGLUHFWO\XQGHUWKHWKUHDGJXLGH%
%ULQJWKHWKUHDGGRZQEHWZHHQWKHWKUHDGWHQVLRQGLVFV&
4. Continue threading in the direction indicated by the arrows.
%ULQJWKHWKUHDGIURPWKHULJKWLQWRWKHVORWRQWKHWDNHXS
OHYHU'
7DNHWKHWKUHDGGRZQDQGEHKLQGWKHODVWJXLGHMXVWDERYHWKH
QHHGOH(