Lawn Mower User Manual

Driving

• Connect the other end of the BLACK lead to a

good CHASSIS EARTH, away from the fuel tank

and battery.

Remove the leads in reverse order:

• The BLACK cable is removed from the chassis and

then the fully charged battery.

• Finally the RED cable from both batteries.

Driving the machine

1. Release the parking brake by pulling the handle

up.

2. Select high or low speed with the switch on the

control panel.

3. Carefully press down one of the pedals until the

required speed is attained.

Pedal (1) is pressed down to travel forwards and

pedal (2) to reverse.

4. Lower the cutting unit to the ground using the lifting

lever. Move the lifting lever forwards.

Parking brake

Speed selector

Driving pedals

Lifting lever lowering position