Operation Manual

56
1.
2.
Care of Your Platinum
Changing the Light Bulb
Only use light bulbs of a type as indi-
cated on the front of the machine (12V,
5W). They are available at your authorized
Husqvarna Viking dealer.
Switch off the main switch.
1. Place the light bulb remover with its
deep hole, marked OUT, around the
bulb.
Do not turn the bulb, just pull it out to
remove it.
2. When inserting, place the light bulb
remover with its shallow hole, marked
IN, around the new bulb. Insert the
bulb by pushing it up.