Operation Manual

English – 13
ASSEMBLING AND ADJUSTMENTS
Safety when assembling and
settings
• Never leave the machine unsupervised with the engine
running. Always stop the blades, apply the parking brake,
stop the engine and remove the keys before leaving the
machine.
• Never allow children or other persons not trained in the
use of the machine to use or service it. Local laws may
regulate the age of the user.
• Electrical shocks can cause injuries. Do not touch cables
when the engine is running. Do not test the ignition
system with your fingers.
• The machine is tested and approved only with the
equipment originally provided or recommended by the
manufacturer.
Cutting unit
The machine can be fitted with 4 different cutting decks.
Combi 132 and Combi 155 with 7-step, manual cutting height
adjustment and Combi 132X and Combi 155X with variable,
hydraulic cutting height adjustment.
The Cutting Unit Components
- Combi 132, Combi 155
The components mentioned are:
1 Attachment point
2 Bolt
3 Universal drive shaft
4 Link joint
5 Cutting height control
6 Service strut
The Cutting Unit Components
- Combi 132 X, Combi 155 X
The components mentioned are:
1 Attachment point
2 Bolt
3 Universal drive shaft
4 Link joint
5 Service strut
6 Hydraulic hoses
!
WARNING! The engine emits carbon
monoxide, which is a colourless, poisonous
gas. Do not use the machine in enclosed
spaces.
!
WARNING! The engine and the exhaust
system become very hot during operation.
Risk of burn injuries if touched.
1
1
2
2
4
5
5
6
3
1
1
2
2
4
6
5
3