Owner's Manual

CONTROLS
20
Ignition Switch
The ignition switch is placed on the control panel and
is used to start and stop the engine.
Turn the key clockwise to start the engine.
8058-145
Ignition switch
Choke Control
The choke control is used for cold starts in to provide
the engine with a richer fuel mixture.
For cold starts the control should be pulled out to its
extent. Push the choke in once the engine starts.
8058-145
Choke control
Fuses
Fuses are located on the left hand side of the
machine. They are accessed by tilting the seat
forward. Fuses are flat pin fuses type as used in
automobiles.
There are two fuses with ratings and functions:
1. 20 A, Primary fuse
2. 7.5 A, Mower deck coupling
8050-082
Fuses