Operation Manual

47Instruction book Lily 555/545
Sewing hints
Sewing on belt loops
Use presser foot B and lower the
feed teeth. Fold in about 1 cm on
the short ends. Place the belt loop
on the garment and under the press-
ser foot. Set a wide zigzag stitch.
Sew a bartack from the outer edge
to the center of the loop, move the
material and sew a new bartack.
Continue to sew along the entire
length of the loop's short side.
"Jeans hem"
The clearance plate is used when
sewing over thick seams.
One side of the plate is thicker than
the other. Use the side that suits the
thickness of the seam best.
Free arm
To facilitate sewing trouser legs and
sleeve hems use the free arm.
The free arm also allows you to darn
socks (darning foot is an optional
accessory).
Sewing