User Manual

Table Of Contents
Remove objects such as
branches, twigs and stones
from the work area before you
use the product.
Objects that hit against the
cutting equipment can eject
and cause damage to persons
and objects. Keep bystanders
and animals at a safe distance
from the product.
Never use the product in bad
weather such as fog, rain,
strong winds, intense cold and
risk of lightning. To use the
product in bad weather or in
moist or wet locations is tiring.
Bad weather can cause
dangerous conditions, such as
slippery surfaces.
Look out for persons, objects
and situations that can prevent
safe operation of the product.
Look out for obstacles, such
as roots, stones, twigs, pits
and ditches. Long grass can
hide obstacles.
To cut grass on slopes can be
dangerous. Do not mow
excessively steep slopes. Do
not use the product on ground
that slopes more than 15°
Exercise extreme caution
when changing direction on
slopes. Operate the product
across the face of slopes. Do
not move up and down.
Be careful when you go near
hidden corners and objects
that prevent a clear view.
Work safety
WARNING: Read the
warning instructions that
follow before you use the
product.
Use this product to cut grass
lawns only. It is not permitted
to use it for other tasks.
Use personal protective
equipment. Refer to
Personal
protective equipment on page
7
.
Make sure that you know how
to stop the motor quickly in an
emergency.
Do not operate the product in
rain or wet conditions. The risk
of electrical shock increases if
water enters the product.
Do not operate the product
unless the blade and all
covers are attached correctly.
An incorrectly attached blade
can come loose and cause
personal injury.
Make sure that the blade does
not hit objects such as stones
and roots. This can do
damage to the blade and bend
the motor shaft. A bent axle
causes heavy vibration and a
6 1680 - 003 - 26.11.2021