Hedge Trimmer Operator's Manual

2 – English
SYMBOL EXPLANATION
WARNING! The hedge trimmer can
be dangerous!
Careless or incorrect use can result in
serious, even fatal injury.
Symbols
This product is in accordance with
applicable CE directives.
Always wear approved protective gloves.
Cutting tool. Do not touch the tool
without first switching off the engine.
Checks and/or maintenance should be
carried out with the engine switched off,
with the stop switch in the STOP
position.
Always use approved protective gloves.
Regular cleaning required.
Ocular control.
Approved eye protection must always be
used.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
Use anti-slip and stable boots.
This machine is not electrically
insulated. If the machine touches or
comes close to high-voltage power lines
it could lead to death or serious injury.
Electricity can jump from one point to
another by arcing. The higher the
voltage, the greater the distance
electricity can jump. Electricity can also
travel through branches and other
objects, especially if they are wet.
Always keep a safe distance of at least
10 m (30 ft) between the machine and
high-voltage power lines and/or any
objects that are touching them. If you
need to work closer than this always
contact the relevant power company to
make sure the power is switched off
before you start work.
The machine can be dangerous. Make
sure that no people or animals come
closer than 15 m (45 ft) when the
machine is running.
Arrows which show limits for handle
mounting.
Always use
• Ear protection
• Approved eye protection
Read through the Operator‘s Manual
carefully and understand the content
before using the hedge trimmer.