Operation Manual
~ 53 ~6. Care of Your Machine
DISPLAY MESSAGES
On number display On PC screen
Messages are displayed on number display of control panel and/or PC screen. When a message is displayed, À x the
problem following the instruction in the message. The message will disappear, once the problem has been À xed.
USB cable is not connected.
• Connect your PC to the sewing machine with USB cable
Needle thread breakage or incorrectly threaded condition is
detected.
• Check threading.
• Check hoop position.
Presser foot is not lowered.
• Lower presser foot by lowering presser foot lifter.
Buttonhole lever is not lowered or raised.
• Lower buttonhole lever when sewing buttonholes.
• Raise buttonhole lever when sewing stitch patterns.
SAFTY DEVICE
ACTIVATED
Machine is locked up due to thread entangled with bobbin
case or rotation interrupted forcibly.
• Turn off power switch and eliminate the problem that
caused the machine to stop.
Bobbin winder is moved to right (operating position) during
sewing.
• Check bobbin winder and move it to left.
Small hoop is attached when design for large hoop is
transmitted.
• Turn off power switch and attach large hoop.
• Check hoop position.
• Check that feed dogs are lowered.
• Make sure À rst color block has been sent.
TROUBLE SHOOTING
eng manual rev1.indd 53 2009-11-24 11:13:08