Operation Manual

2. SET UP
17
5. Push the bobbin to the right (E).
6. When the bobbin winder spindle is
pushed to the right, the InfoDisplay will
blink on and off displaying “SP“ (F).
7. Hold the thread end and press the foot
control (or press START/STOP button)
to start the bobbin winding (G).
8. After a few turns of the bobbin, cut off
the thread end. When the bobbin is full it
will stop rotating. Push the bobbin winder
spindle to the left and remove the bobbin.
Cut off the thread (H).
Note: When the bobbin winder spindle is pushed to
the right, “bobbin winding position”, the machine will
not sew and the handwheel will not turn. To start
sewing, push the bobbin winder spindle to the left
“sewing position”.
E
F
G
H