Operation Manual

2. SET UP
13
4. Bring the thread down between the thread
tension discs (D).
5. Continue threading the thread around the
check spring holder (E).
6. Bring the thread from right to the left
through the slot on the take-up lever (F)
and then downwards again.
7. Bring the thread downwards and insert the
thread from the right through the thread
guide and the wire loop (G).
8. Use the needle threader (H) to thread the
needle (see needle threader instructions on
the next page). Place the thread under the
presser foot.
D
E
F
G
H