Operation Manual

2
1
3
4
6
5
Getting Ready to Sew – 7
CONNECTING THE
POWER SUPPLY
Turn the power switch off.
Before plugging in the foot control, check to ensure
that it is of type “21361” (see underside of foot
control).
Insert the foot control plug into the
machine socket.
Insert the power supply plug into the
machine and the wall outlet.
Turn the power switch on.
1. Power switch
2. Foot control plug
3. Machine plug
4. Machine socket
5. Power supply plug
6. Wall outlet
Note: Before connecting to the power supply, make
sure the voltage shown on the machine conforms to
your electrical power.
For the USA and Canada:
This sewing machine has a polarized plug (one blade wider than the other). To
reduce the risk of electric shock, this plug is intended to t in a polarized outlet
only one way. If the plug does not t fully in the outlet, reverse the plug. If it still
does not t, contact a qualied electrician to install the proper outlet.
DO NOT modify the plug in any way!
Getting Ready to Sew