Operation Manual

66
Embroidery Mode
Change thread color
When it is time to change the needle thread the machine stops
and on model 30 the upper thread is cut. Change the spool and
re-thread the machine. The next recommended color is shown in
the pop-up message.
Design includes elements that cannot be
opened
Some designs may contain data that is too complex for this
embroidery machine. Please use your 5D™ Organizer software to
re-save the design.
Remove the hoop
This pop-up will appear when a function has been chosen that
forces the embroidery unit to move outside the limits for the
attached hoop. In order for the embroidery arm to move freely,
remove the hoop and then press the OK button.
Connect USB embroidery stick
If you attach the embroidery unit or press the Stitch Menu button
in Embroidery Mode without having a USB stick connected, this
pop-up message will appear. Connect a USB stick and press the
OK button so that you can load a design. This pop-up message
also appears if the USB stitck is removed while a design is being
loaded or stitched out.
The data on the USB embroidery stick is not
readable
This pop-up message will appear when your sewing machine can
not access the information on the USB embroidery stick. The
USB stick could be damaged or you might be using a USB stick
that is non-compatible with the sewing machine. Press the OK
button to close the pop-up message.
Embroidery À nished
A pop-up message informs you when the embroidery is À nished.
Press the OK button to close the pop-up message.